Replacement OEM Rotary Cutter gearbox for Servis Rhino Rotary Mowers.  These gearboxes will have a square housing with 6 bolt mounting with a 1:1.46 speed up gear ratio and mounting holes 60 degrees apart, a 1-3/4" X 20 spline input shaft and a 1.97" X 15 tapered spline output shaft. The center line of the input shaft is 7-1/4" above the bottom of the gearbox mounting flange. There is a gearbox mounting bolt hole directly under the input shaft and each hole is 60 degrees apart. The gear ratio of these gearboxes correctly match the original boxes on your mower.
 This is a heavy gearbox weighing in at 95 lbs. so shipping will be higher than most gearboxes we sell!
These gearboxes are set up to turn CCW (00759205B) but can be reversed by moving the gear on the input shaft to the back of the housing to convert this gearbox into a 00759206B
These have been used on Model AG415 mowers in the center and Left Hand side from early 1991 to current and with the input gear reversed on the RH side since 1991 as well. They have also been used on the AG96 as the outboard gearboxes for 540rpm mowers from June 1992 - April 1996 and 1000rpm mowers from May 1996 - present. Also used on SE15 models.
*****Please note this gearbox is shipped dry and will require filling with gear lube before using!*****