Replacement 90hp Rotary Cutter Gearbox, New Old Stock ideal for a 7' cut rotary cutters with 1-3/4" X 20 spline input shaft and 1.97" X 15 Tapered Spline Output Shaft. These gearboxes will have a square housing with 4 bolt mounting with a 1:1.46 speed up gear ratio and mounting holes 8" on center, a 1-3/4" X 20 spline input shaft and a 1.97" X 15 tapered spline output shaft. The center line of the input shaft is 9-3/16" above the bottom of the gearbox mounting flange to allow additional PTO clearance when raising the deck for transport. There is a gearbox mounting bolt hole directly under the input shaft and each hole is 90 degrees apart. The gear ratio of these gearboxes correctly match the original boxes on your mower. This is a heavy gearbox weighing in at 95 lbs. so shipping will be higher than most gearboxes we sell! These boxes will fit several Howse, King Kutter, Bush Hog, Alamo, Rhino, Land Pride and other brands of mowers *****Please note this gearbox is shipped dry and will require filling with gear lube before using!*****
The use of original equipment manufacturer's names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts. All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.
Brooks AG Parts is in no way affiliated with any product manufacturers including John Deere, Kubota, New Holland, Alamo Group and its subsidiary's, Darrell Harp / Big Bee, Kodiak, King Kutter, Tarter Gate, Woods, or any other manufacturer. The use of their part numbers and or drawings are only used to aide Brooks AG Parts customers in finding the correct Brooks AG Parts replacement part. Brooks AG Parts in in no way implying any of its parts are purchased from any of these companies or their subsidiaries.